Denver · Sub-Zero
Ice Maker Repair
Clear-ice modules, inlet valves and drains on Sub-Zero ice makers, including undercounter machines.
What people describe when they call
- No ice at all, or a handful of small cubes a day
- Cubes coming out hollow, cloudy or welded into a slab
- Water refreezing on the freezer floor beneath the module
- Mineral scale crusting the mould after years on Denver water
Any one of these is diagnosable on the first visit. The $89 service call covers finding out which it is.
What it costs
A range before anyone opens the cabinet.
Flat $89 service call covering the visit and full diagnosis, credited against the repair once you approve it.
- Door gasket or seal replacement
- $260–$700
- Evaporator or condenser fan motor
- $320–$740
- Defrost heater, thermostat or sensor
- $280–$680
- Ice maker, water valve or supply line
- $300–$860
- Electronic control board
- $430–$1,010
- Compressor or sealed-system repair
- $1,370–$3,080
Each line is a range because two cabinets with the same symptom rarely need the same part. What you get on the day is one figure for your unit, agreed with you before any work starts and before anything is dismantled — and the service call above is credited against it the moment you approve.
For scale: a comparable built-in replacement, before installation and cabinetry work runs $12,140–$22,020, which is why even sealed-system work is usually the cheaper road.
How the call runs
- You describe the symptom What the display says, what the cabinet feels like, and when it changed. Half the diagnosis is in the description, and it decides which parts ride along.
- A slot, not a window all day Visits run 8:00 am – 8:00 pm, seven days. The phone is answered around the clock, so an overnight failure is on the board before the crew starts.
- The $89 diagnosis Temperatures at both circuits, pressures where they matter, and electrical checks on the suspect part. The fee is credited against the repair.
- A price before anything comes apart You hear what failed, what it costs to put right, and what happens if you leave it. Nothing is dismantled on an unknown number.
- Verified, then put back The cabinet is brought back into range and watched through a cycle before the technician leaves, and panel-ready joinery goes back the way it came out.
Other Sub-Zero work in Denver
- Refrigerator Repair Diagnosis and repair of Sub-Zero built-in refrigerators, integrated columns and undercounter units.
- Freezer Repair Frost build-up, failed defrost parts and temperature drift on Sub-Zero freezers and freezer drawers.
- Wine Cooler Repair Zone temperature control, seals and compressor work on Sub-Zero wine storage units and columns.
Reviews
Denver owners on ice maker repair
4.9/ 5793 reviews
Cubes came out hollow and half the size they should be. He measured pressure at the fill valve, found it barely trickling, and replaced the valve. Full bin by the next morning.
Vera M.Cherry Creek
Puddle on the floor of our 1920s apartment kitchen every morning. The drain line under the ice maker had come loose behind the cabinet. He re-seated and clamped it, then checked the floor for damage.
Romy H.Capitol Hill
The bin filled with one solid slab instead of cubes, and the ice smelled like the freezer. Harvest arm was out of adjustment and the water filter was ancient. Sorted in one call.
Dexter B.Highland
Talk to someone
Ice Maker trouble in Denver?
Describe what the cabinet is doing and the technician arrives with the parts this fault usually needs. Visits 8:00 am – 8:00 pm, seven days; the line is answered 24/7.